Pianos regularly make movers annual list of products that are most often damaged. Grand pianos are especially troublesome. Practicing the following procedures for dismantling, padding and filling grand pianos will avoid damage, lower claims cost, and enhance customer fulfillment.
1) At least 3 people are needed to handle an infant grand piano. If the child grand piano needs to increase or down stairs or if a complete or concert grand piano requires to be transferred, a minimum of 4 individuals are needed.
2) Constantly finish a comprehensive and accurate stock. It might be required or more effective to use a visual inventory to sufficiently explain and reveal pre-existing damage.
3) As numerous parts are disassembled, please location all hardware in an effectively identified parts bag and then place the parts bag in a "Parts Box".
4) Remove the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Disconnect the lid by getting rid of the hinge pins. Wrap the cover in a clean furnishings pad.
6) Get rid of the prop that holds the cover open and wrap it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Get rid of the pedal assembly and cover it in a clean furniture pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please take care not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by placing a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is unavailable, please usage properly labeled parts bags for this function. When reassembling at destination, please be sure to put the rods in the right order so that the pedals will work correctly.
8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from flopping open while you manage the piano. Cover the top of the piano with two clean furniture pads, neatly folded around the keyboard. Usage elastic band to protect the pads. Keep in mind: Please ensure that the surface area of the piano is dust-free prior to padding it. Padding an extremely sleek surface area that is dirty might trigger fine scratches, especially on a black lacquer finish.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Eliminate the left front leg by placing one person below the piano at the left end of the keyboard. Be sure to have two people raising the corner of the piano while the third individual removes the leg. Keep in mind: Please be sure to keep in mind which legs were eliminated from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please make sure to raise the entire piano slightly while finishing this maneuver to avoid excessive pressure on the remaining, attached legs as the piano ideas. Lift the piano to an upright position on the board. Note: Please guarantee that the soundboard is safe and secure prior to lifting. Be sure that the piano is centered snugly against the brace at the end of the piano board. Keep in mind: Never ever leave the piano ignored. Always have at least someone holding the piano stable at all times.
12) Get rid of the two staying legs and cover them in tidy furniture pads. These legs are held in location by a "crucial and slot" arrangement. To remove the leg, slide it inward toward useful reference the center of the piano until it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and securing them. Place folded burlap pads over the furnishings pads however under the straps to offer additional defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for security versus home damage, position the keyboard end of the piano towards the bottom of the stairs. Attach a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano board and location it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The best location to fill the padded cover is between the piano and the preceding tier or between the wall and the piano.
Although grand pianos represent a considerable challenge, they can be moved without damage by utilizing good sense and practicing the procedures listed above.